I have successfully re-compiled and re-flashed the firmware source to remove the console on ttyS0, as suspected the console attached to ttyS0 was the root of my problems, now avrdude will talk to the WidgetBoard!
and here is my WidgetBoard booting my test blinky on ContikiOS as seen by the gateway ttyS0
now back to writing the contiki radio driver…..
Similar Posts:
- #WidgetMesh Gateway continued…
- WidgetMesh Coordinator/Gateway Device
- It Lives!!!
- Reading Widget Battery Voltage
- Recovering from Incorrect Fuse Settings on the Strobit
No TweetBacks yet. (Be the first to Tweet this post)
PDF 