Ok here is the 1st basic trigger personality board.

Features:

  • x4 LEDs for visual indication.
  • x2 Push Button Switches, one tied to input for manual triggering/testing, the second independent, could be used for channel or function selection, both could used in conjunction with LEDS for advanced function selection.
  • 1 Strobe output. 400V Max (so will work with older type strobes)
  • 1 protected TTL trigger input. 
  • Small prototype area.
  • Low profile, All large components are mounted underneath.

Still a little cleaning up required but basic functionality is there.

Still TO DO:

  • Change MOC3023 to SMD footprint, I don’t really want the possibility of a large strobe voltage right where a thumb might be.

Basic Triggr Personality PCB

image

No TweetBacks yet. (Be the first to Tweet this post)