Comments on: RFM12 Tutorial – Part1 http://blog.strobotics.com.au/2008/01/08/rfm12-tutorial-part1/ Where Photographer and Geek merge...... Tue, 09 Mar 2010 03:57:48 -0800 http://wordpress.org/?v=2.8.4 hourly 1 By: volt http://blog.strobotics.com.au/2008/01/08/rfm12-tutorial-part1/comment-page-1/#comment-967 volt Sat, 14 Nov 2009 10:41:32 +0000 http://blog.everythingrobotics.com/2008/01/08/rfm12-tutorial-part1/#comment-967 hi, Now i am working with RFM12b,the problem is,c8051F120 controller can transmitted and c8051F326 can received properly,but while c8051F326 transmitting the c8051F120 is not receiving. for TX/RX, i am using RFM12b,,,,,,,,,,,,,, can u plz explain the problem …….,,,,,,,,,,,,,,,,,,,,,,,,,,,,, hi,

Now i am working with RFM12b,the problem is,c8051F120 controller can transmitted and c8051F326 can received properly,but
while c8051F326 transmitting the c8051F120 is not receiving.

for TX/RX, i am using RFM12b,,,,,,,,,,,,,,

can u plz explain the problem …….,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

]]> By: Linkliste zum Funkmodul RFM12 | zInformatik http://blog.strobotics.com.au/2008/01/08/rfm12-tutorial-part1/comment-page-1/#comment-437 Linkliste zum Funkmodul RFM12 | zInformatik Fri, 23 Jan 2009 10:25:55 +0000 http://blog.everythingrobotics.com/2008/01/08/rfm12-tutorial-part1/#comment-437 [...] Tutorial (englisch): http://blog.everythingrobotics.com/2008/01/08/rfm12-tutorial-part1/ [...] [...] Tutorial (englisch): http://blog.everythingrobotics.com/2008/01/08/rfm12-tutorial-part1/ [...]

]]> By: qhash http://blog.strobotics.com.au/2008/01/08/rfm12-tutorial-part1/comment-page-1/#comment-433 qhash Mon, 29 Sep 2008 19:26:23 +0000 http://blog.everythingrobotics.com/2008/01/08/rfm12-tutorial-part1/#comment-433 Hi, I am currently working with the RFM12B transciever. Hope I will run them, I have already written a transmitter side, still working on the reciever. However, if anyone would share the code, I would appreciate that. I also want to implement checksum. Discussion about these transciever through PM or emila would be great as well. Thanks in advance. Hi,
I am currently working with the RFM12B transciever. Hope I will run them, I have already written a transmitter side, still working on the reciever. However, if anyone would share the code, I would appreciate that. I also want to implement checksum. Discussion about these transciever through PM or emila would be great as well.
Thanks in advance.

]]> By: Stephen Eaton http://blog.strobotics.com.au/2008/01/08/rfm12-tutorial-part1/comment-page-1/#comment-328 Stephen Eaton Thu, 26 Jun 2008 10:23:35 +0000 http://blog.everythingrobotics.com/2008/01/08/rfm12-tutorial-part1/#comment-328 Tutorial Part 2 is now online. Tutorial Part 2 is now online.

]]> By: Stephen Eaton http://blog.strobotics.com.au/2008/01/08/rfm12-tutorial-part1/comment-page-1/#comment-325 Stephen Eaton Tue, 17 Jun 2008 06:53:15 +0000 http://blog.everythingrobotics.com/2008/01/08/rfm12-tutorial-part1/#comment-325 Oscilloscope will be fine, it's what I've been using up until now, but you can only view 2 channels at a time (if using 2 channel model). I also replied to you posts on the forums so they should give you something to try. Oscilloscope will be fine, it’s what I’ve been using up until now, but you can only view 2 channels at a time (if using 2 channel model).

I also replied to you posts on the forums so they should give you something to try.

]]> By: ayeshaSafi http://blog.strobotics.com.au/2008/01/08/rfm12-tutorial-part1/comment-page-1/#comment-324 ayeshaSafi Tue, 17 Jun 2008 06:48:00 +0000 http://blog.everythingrobotics.com/2008/01/08/rfm12-tutorial-part1/#comment-324 Hi, I wish u get settled in your new home as soon as possible.and find it comfortable and couzy. Acn i use oscilloscope instead of logic analyser for the same purpose. Hi,
I wish u get settled in your new home as soon as possible.and find it comfortable and couzy.
Acn i use oscilloscope instead of logic analyser for the same purpose.

]]> By: Stephen Eaton http://blog.strobotics.com.au/2008/01/08/rfm12-tutorial-part1/comment-page-1/#comment-323 Stephen Eaton Tue, 17 Jun 2008 00:47:36 +0000 http://blog.everythingrobotics.com/2008/01/08/rfm12-tutorial-part1/#comment-323 I have just moved house so everything is pretty well all over the place until I get unpacked. I have also been playing around with a logic analyser so I can better monitor the SPI interaction between the RFM12 and the MCU. Stay tuned... I have just moved house so everything is pretty well all over the place until I get unpacked.

I have also been playing around with a logic analyser so I can better monitor the SPI interaction between the RFM12 and the MCU.

Stay tuned…

]]> By: ayeshaSafi http://blog.strobotics.com.au/2008/01/08/rfm12-tutorial-part1/comment-page-1/#comment-322 ayeshaSafi Mon, 16 Jun 2008 10:15:39 +0000 http://blog.everythingrobotics.com/2008/01/08/rfm12-tutorial-part1/#comment-322 I am anxiousely waiting for the next parts. when are they comming I am anxiousely waiting for the next parts. when are they comming

]]> By: ayeshaSafi http://blog.strobotics.com.au/2008/01/08/rfm12-tutorial-part1/comment-page-1/#comment-321 ayeshaSafi Mon, 16 Jun 2008 10:14:12 +0000 http://blog.everythingrobotics.com/2008/01/08/rfm12-tutorial-part1/#comment-321 Ayesha Hello, Its great but i m waiting for the next parts as I am working on RFM12BP and facing a lot lot of problems.I am sure that the next parts will help me out Wating anxiousely. When is the next part comming. Ayesha
Hello, Its great but i m waiting for the next parts as I am working on RFM12BP and facing a lot lot of problems.I am sure that the next parts will help me out Wating anxiousely. When is the next part comming.

]]> By: bill03 http://blog.strobotics.com.au/2008/01/08/rfm12-tutorial-part1/comment-page-1/#comment-318 bill03 Mon, 05 May 2008 11:20:45 +0000 http://blog.everythingrobotics.com/2008/01/08/rfm12-tutorial-part1/#comment-318 hello, excellent tutorial! Can't wait for part 2. hello, excellent tutorial! Can’t wait for part 2.

]]>