RFM12 Prototype Board
The RFM12 module is a pain to prototype with due to the 2mm header (won’t fit into the breadboard), so I’ve whipped up a prototyping board that brings out the pins to a standard header. It’s been it sent off for fabrication today so I should have back in the next week or so. I’m trying out www.batchpcb.com for the first time so will be interested in how they turn out.
In the meantime I’ve soldered on some wires but I don’t really like it.
Similar Posts:
- Strobit Triggr Prototype Finished
- RFM12 Tutorial – Part2
- Repartition Blues
- PIC, SPI and the RFM12
- StrobIt Board
No TweetBacks yet. (Be the first to Tweet this post)
PDF 